vawt.tk or wrapwind.com vawt vertical axis wind turbine hawt green. -first i lifted the silo 3 feet -i tested the propset with blades extended -i increased the gap bettween the prop and the FAWT bottom -i increased the gap bettween the prop tips and the wall that covers the prop -i tested the carbon fiber blades -all testing was done at approx 15 kmh winds.and maybe gusts of wind at 20kmh FAWT SILO is a fixed axis wind turbine but it uses lift based p-rops, i have playing with this idea for few years now in my head, i decided to give it a go, it is at the begining stages and there alot of mods still to be done. the idea is to take the air from horizontal to a downward direction and at the same time is to totally hide the proppeler from view. i am hoping and predicting that it will be 60% effecient VS the HAWT. the first step is to build one 4 times as big where the top and bottom defflectors will be 4 feet in width. i hope you enjoy this video and not shoot me down as much. think diffrent…… wind turbine generator Ametek renewable energy vawt hawt Vertical Savonius diy environment green roof power plans free controller batteries windturbine alternative efficiency efficient electric electricity grid homemade vertical axis goderich ontario, vawt “wind turbine” generator, hawt, vertical, wind, turbine, axis, green, energy, wind mill best regards
TOP VIDEO - Top Video World - Greek Videos
March 25, 2011 -- wind turbine vawt vertical axis hawt english version (25)
November 24, 2011 -- HOW WIND POWER GENERATORS WORK (0)
November 23, 2011 -- Free Wind Power Generator Plans (0)
April 11, 2011 -- AMETEK 40v DC Motor – For a Wind Generator (0)
April 8, 2011 -- Wind Generator and Solar Panel – Build Your Own Portable Wind Generator at a Low Cost! (0)
March 31, 2011 -- FREE Energy Home Wind Generator – How to Create FREE Energy With DIY Wind Generators (0)
March 30, 2011 -- Windmills, Wind Turbines, & Wind Generators – Using Wind Energy at Home (0)
March 18, 2011 -- Homemade Wind Generator | How To Build A Wind Generator | Wind Generator Plans (0)
February 24, 2011 -- DIY Wind Turbines – ‘Finally Revealed’ Step by Step DIY Instructions to Build Your Own Wind Turbines (1)
March 28, 2011 -- Residential Wind Turbines DIY Home Power Generator (3)
![PES peace eco smile – Official Trailer [HD]](http://dvdcdshop.gr/wp-content/uploads/2012/05/059-60x60.jpg "PES peace eco smile – Official Trailer [HD]")
March 22, 2011 at 9:05 pm
Energy sources without the need for fuel or energy input exist ,But the Establishment doesn’t want ppl to know this,Go to LT-MAGNET-MOTORdotCOM and get the blueprints for a genuine magnet motor ,Let the revolution begin!
March 22, 2011 at 9:05 pm
The Oil companies are trying their best to stop free energy ideas from spreading to common ppl.
We need to put an end to this corruption ,start generating your own electricity now.
Visit LT-MAGNET-MOTORdotCOM and get the blueprints . Join the Revolution!!
March 22, 2011 at 9:05 pm
Aeinar, thanks for your intrest, i have placed this project on hold for now. i am trying to finish The Column VAWT project. i will get some data for you as soon as i can.
the only messurment i have is 18kmh 42 watt. not much but i still can improove it with more efficient wind deflection. but for now the project is on hold.
Best Regrads
Sam Chamas
March 22, 2011 at 9:05 pm
This is amazing!
It seems to have some serious output!
Have you measured what the wattage output is?
I’m really interested to know!
What kind of speeds can the unit withstand?
March 22, 2011 at 9:05 pm
yes, the Big O did improove the wind travel downward.
thanks
sam
March 22, 2011 at 9:05 pm
Nice design. 1 question, though. The ‘big O’ you placed around the edge, was that to create a sort of Venturi effect? To speed up the wind coming in from above?
March 22, 2011 at 9:05 pm
hey now that is a cool design and it is eye pleasing also it really gets them blades going good
March 22, 2011 at 9:05 pm
thanks Erik, it is Dangerous, it should have been 3 feet higher.
your projects look promissing too, keep up the good work.
regards
March 22, 2011 at 9:05 pm
don’t come to close with that cam. hehe.
That thing would take out your cam easely and your hand too.
Extremly cool turbine.
Looks really hard to build but you did it.
Congrats.
Greetings
Erik
March 22, 2011 at 9:05 pm
Hi there guys, I am working on a new style of FAWT, a bit simpler in design.
Winter is coming in fast here in Canada, it will be an indoor project for now.
Best regards
March 22, 2011 at 9:05 pm
i relised that ceiling fans are capable of producing ok power and they are all over the junk yard, the magnets can be found in speakers or old PC hard drives.
here in north America we can buy Neo magnets, but other places in the world not so lucky.
regards
March 22, 2011 at 9:05 pm
hi there guys, just to give you a qiuck update, i am working on the blades, but the homemade blades are folding backwards, i tried a ring on the back side and it works but noisy.
the blade housing cover fell on me. i readjusting how it is mounted.
always fun,
so you know the objective is to make my blades and PMA from things we can find arround us.
March 22, 2011 at 9:05 pm
thanks, i am going to test with other diffrent prop shapes to figure out the best style.
regards
March 22, 2011 at 9:05 pm
Super!
Wash must still set on the axis of rotation fixed fairing to increase the speed of the wind and not lose half of the wind flow. Like the airplane, the propeller.
regards
March 22, 2011 at 9:05 pm
well, i am not sure that this is true, when i had it on the deck, it was pointed in one direction only, the wind might have been on a angle. but in the FAWT Silo the wind hit it at approx 90 degrees, with a great air compressed force. i still have all kinds of improvement to do but i am follwing trial and error test, i do not have and fancy tools.
regards
March 22, 2011 at 9:05 pm
Thanks. It looks like it turns faster in your funnel than it does just out in the open. Is that what you saw too?
Plus it’s kind of nice that the funnel protects the blades and keeps people from getting hurt.
March 22, 2011 at 9:05 pm
thanks man, it does not look the best but for a backyard frist test, it it pretty sweet.
regards
March 22, 2011 at 9:05 pm
the custom blades has alot more tork, not like the carbon fiber ones. so the custom blades require custom pmg and carbon fiber blades can use dc motor like the treadmill dc or ametek.
regards
March 22, 2011 at 9:05 pm
thanks dude,i hope it land where no one can sue me…lol… i am planing to mount my “custom propset 01″ with the cieling fan i moded on the fawt Silo…that will be another vid..
thanks again
March 22, 2011 at 9:05 pm
vawt 350rpm vs fawt custom propset 01 are arround 450rpm very simulair at wind 15kmh.
i did not messure the carbon fiber blades, they are way up there on speed i think 800rpm at 15kmh
regards
March 22, 2011 at 9:05 pm
another awesome update. this thing rips I hope it does not fly away while you sleep.and if it does I hope it lands at my house.GREAT JOB KEEP US UPDATED THANKS
March 22, 2011 at 9:05 pm
what is the rpm of the fixed axis wind turbine compared to the vawt rpm?
March 22, 2011 at 9:05 pm
DO drop the cat in there!!!
BUT
Save the dogs
March 22, 2011 at 9:05 pm
You did it! Congratulations!
March 22, 2011 at 9:05 pm
Don’t drop the cat in there!
I’m impressed with the airflow even though you have re-directed it!